CALL NOW
A Higher Standard for HVAC Coil & Duct Cleaning. All the Traditional Best Practices + Dry Fogging
Few places in your home have a higher impact on the quality of the air occupants breathe than the surfaces inside your HVAC branches and trunk line. But few surfaces are harder for businesses and homeowners to reach.
Let us perform one of the lowest cost services for improving indoor air quality. If the dust build-up is enough, we will improve the energy efficiency of your blower and compressor.
Step 1 - High-pressure air to knock dirt loose, then vacuum off the AC and Furnace Coils to eliminate any build-up of dirt and debris. Heating and cooling coils with 1/2 inch of dust can decrease energy efficiency by 21%.
Step 2 - Run high-pressure air throughout the HVAC trunk lines and branches to break dirt loose, then run the vacuum hose into the HVAC system to suck up all the loose dirt and other contaminants.
Step 3 - Scrub and rinse return air vents, and HVAC vents and louvers.
Step 4 - Brush off any remaining dirt on the HVAC coils and spray a special chemical on coils to eat up and clean the last of the dust.
Step 5 - run a camera through your hvac system so you can see the work we completed.
Step 6 - Dry fog your system using our patented two-step process.
Mold traveled to your building through the air. This means it will travel through your hvac system and in the air throughout the property as well. While other remediation companies quarantine and treat the directly affected area, we go a step further and disinfect your entire property with dry fog. Every square foot of floor space, wall space, ceiling space, counter space, and all furnishings.
We dry fog the entire premise twice. First with a hospital-grade sterilant. Then second with an antimicrobial coating. A study conducted by the Army Corps of Engineers shows this patented process will protect your property from future mold growth and reduce the mold spore count in your air for 90+ days after treatment.
No other solution is better for occupant health.
The cost of mold removal, remediation, and/or total restoration can vary greatly. Depending on how much work needs to be done, you can expect to pay roughly $.99 to $3.99 per square foot.
For larger commercial, industrial or government facilities we offer volume discounts based on square footage. Invite us out for a free estimate, and we will prove we are the highest value option available.
We provide references on request.
Air Quality Tests are $199 each. We take air samples, then send them to certified, third-party labs, who within three days produce a report that we will review with you, that details of what and what level of harmful contaminants are found in your air.
When people find or suspect black mold at their properties, they choose Pure Maintenance because they can't get our patented dry fog process anywhere else.
We offer all the services that aconventional remediation and water damage restoration company might offer.... and more. We are the exclusive licensed mold remediation service provider in our eleven counties in Florida that offers a patented, eco-friendly dry fog system employing a hospital-grade sterilant and an FDA-registered antimicrobial. Available nowhere else.
Our approach is simultaneously more effective, quicker, safer, and cost-efficient. As a result, Pure Maintenance has seen rapid growth, growing to over a hundred locations nationwide with more than 30,000 satisfied customers in less than three years.
We invite you to request an estimate and compare. See for yourself. We have saved our commercial clients tens of thousands, while our residential customers on some large projects have saved thousands too!
Our mold remediation technique is at least 10 times, often 100 times, and in some cases 1000 times more effective than the procedures implemented by other companies in the field. This is possible because the size of our Dry Fog particles is smaller than a mold spore, reaching any space a mold spores can. This includes individual strands of fiber in carpet and curtains. Penetrating into the texture of furniture, and the grain of wood - places that liquids simply can't access without doing more harm than good.
Does this seem too good to be true?
Consider a 2000 square foot home with 20 square feet of black mold. Traditional mold removal quarantines and treats the immediate and surrounding area around the black mold, perhaps totaling 100 square feet. We do the same.
However, what sets us apart is we ensure that our dry fog reaches every surface of every item in your home - not just a ~100 square foot area, but the entire volume of air and every surface within your home or business. This includes treating all your belongings! For a 2,000 foot home, we easily treat more than 10,000 square feet of surface area... and treat it twice! First, with our hospital-grade cold sterilant, followed by a preventative antimicrobial treatment which provides 90 days of ongoing "cleaning" and prevention.
10,000 square feet divided by 100 square feet = 100. Hence our claim that we are 100 times more effective.
Why does this comprehensive approach matter? Florida is very humid, which means mold spores can take hold and grow very easily indoors. Mold spores and their mycotoxins travel by air and spread as rapidly through a home as air does. By using Pure Maintenance, you eliminate the risk of leaving a stone unturned. A total home cleanse brings your home to a level of cleanliness that will surpass any prior level in its history.... when defining cleanliness by mold spore, virus and bacteria count.
Your health will notice the difference. There is simply no comparison anywhere else in the market!
Hiring an independent inspection-only company can on average cost $600 for air samples, lab analysis and a report. While doing this can save you thousands of dollars, and even provide health-affirming information, there are instances where it is simply a waste of $600. During our first visit, we provide you the information you need to make the best decision, with one benefit being, leaving more money in your pocket.
Another, perhaps bigger opportunity for cost savings comes from our patented protocol which can reduce the material costs associated with demolition, reconstruction and all the associated labor. One simple example is an army base where two buildings were slated to be completely demolished because the mold infestation was felt to be beyond repair. Our protocol saved those two buildings, and thereby easily saved tens of thousands of dollars.
Another way to potentially save, is to have your propery insurance pay for some and possibly all of the mold damage. If you want to look into this option, we can connect you with one of our trusted public adjusters, whose job is to maximize the payout you deserve from your insurance company.
The last way we have delivered cost savings, is in instances where professional mold remediation from our company is clearly overkill, we have helped home owners by providing them with a simple protocol they can implement to take care of a small mold issue.
Advocating or our clients by putting ourselves in their shoes is one more we strive to your absolute best option for mold remediation and water damage restoration.
Time is money.
Choose Pure Maintenance and we can assure you an outcomes that is on par in some cases and superior in most cases to those of alternative methods, AND do it in less time.
The national average for mold remediation often involves a week's worth of disruption. With us, the average time spent on your premises may spread across a week, but the actual time involved is on average less than a single day.
We are bonded and insured up to one million dollars, and hold certifications from the state of Florida to execute both mold assessment and remediation.
We are happy to provide proof of any of this documentation.
What we do works every time.
We guarantee that your indoor air quality will be on par with or surpass the quality of the air outside your property. If in the off chance that the lab results come back with poor results, we will reapply the dry fog free of charge.
When all remediation protocols are complete, we include at no extra charge... one outdoor air quality test + one indoor air quality test. We then send the two he post-remediation air quality mold test samples to a third-party lab. When we and our clients receive the lab results we get on the phone with our client to review these results by comparing your indoor results with your outdoor results.
Once we have confirmed that your indoor air is as quality as your outdoor air, then mission has been accomplished!
With Pure Maintenance the air quality throughout your entire home is now fresh, not just in one place!
We specialize in Total Building Cleaning. If you can't afford our total building disinfection. Depending on the size of your HVAC system, you can spend as little as a a few $100 for residential systems to a few $1000 for commercial systems, you can create an immediate impact on undesirable odors, and reduce allergies, asthma, headaches, respiratory infections, sneezing, and sinus congestion for occupants.
You’re at the bottom of the page! Since you took time to learn more… when you book an appointment for any one of our solutions we will provide a 5% discount upon request.
